Needle Size Chart
Convert between US, UK, metric, and Japanese needle sizes. Type any size to find its match.
These are knitting-needle sizes, not crochet-hook sizes. UK/Canadian means the traditional numbering system. US half sizes follow KnitPro; Japanese numbers 0–15 follow Clover (0 = 2.1 mm). A dash means no numbered equivalent is listed here; larger Japanese needles use millimeters.
US labels vary: KnitPro groups 12–12.75 mm as US 17 and 15–16 mm as US 19; ChiaoGoo uses 12.75 mm and 15 mm respectively. Match the millimeter diameter, not just the number. Yarn categories are CYC guidelines, not guarantees of gauge or fit; lace often uses larger needles for openwork.
| Metric (mm) | US | UK/Canadian | Japanese | Yarn Weight |
|---|---|---|---|---|
| 1.5 | 000 | — | — | Lace |
| 1.75 | 00 | 15 | — | Lace |
| 2.0 | 0 | 14 | — | Lace |
| 2.1 | — | — | 0 | Lace |
| 2.25 | 1 | 13 | — | Lace / Super Fine |
| 2.4 | — | — | 1 | Super Fine |
| 2.5 | 1.5 | — | — | Super Fine |
| 2.7 | — | — | 2 | Super Fine |
| 2.75 | 2 | 12 | — | Super Fine |
| 3.0 | 2.5 | 11 | 3 | Super Fine |
| 3.25 | 3 | 10 | — | Super Fine / Fine |
| 3.3 | — | — | 4 | Fine |
| 3.5 | 4 | — | — | Fine |
| 3.6 | — | — | 5 | Fine |
| 3.75 | 5 | 9 | — | Fine / Light |
| 3.9 | — | — | 6 | Light |
| 4.0 | 6 | 8 | — | Light |
| 4.2 | — | — | 7 | Light |
| 4.5 | 7 | 7 | 8 | Light / Medium |
| 4.8 | — | — | 9 | Medium |
| 5.0 | 8 | 6 | — | Medium |
| 5.1 | — | — | 10 | Medium |
| 5.4 | — | — | 11 | Medium |
| 5.5 | 9 | 5 | — | Medium / Bulky |
| 5.7 | — | — | 12 | Bulky |
| 6.0 | 10 | 4 | 13 | Bulky |
| 6.3 | — | — | 14 | Bulky |
| 6.5 | 10.5 | 3 | — | Bulky |
| 6.6 | — | — | 15 | Bulky |
| 7.0 | — | 2 | — | Bulky |
| 8.0 | 11 | 0 | — | Bulky / Super Bulky |
| 9.0 | 13 | 00 | — | Super Bulky |
| 10.0 | 15 | 000 | — | Super Bulky |
| 12.0 | 17 | — | — | Super Bulky |
| 12.75 | 17 | — | — | Super Bulky / Jumbo |
| 15.0 | 19 | — | — | Jumbo |
| 16.0 | 19 | — | — | Jumbo |
| 19.0 | 35 | — | — | Jumbo |
| 25.0 | 50 | — | — | Jumbo |
No matching needle size found.
Why there are four different systems
Metric is the only system that tells you what the needle actually measures. A 4.0 mm needle is 4.0 mm. Done.
US sizes are labels. A US 7 means 4.5 mm and a US 8 means 5.0 mm, but nothing about those numbers hints at a diameter.
Old UK and Canadian sizes run backward. A UK 14 is tiny, and the numbers shrink as needles grow until you hit 0, 00, and 000. Most modern UK patterns give metric, but the old system still shows up on vintage needles and secondhand pattern leaflets.
Japanese sizes track close to metric but not perfectly. Japanese size 6 is 3.9 mm, Japanese size 8 is 4.5 mm. That offset matters most in fine gauges where a few tenths of a millimeter change the finished fabric.
When metric is the safe bet
Trust the millimeter size first. It's the actual measurement, and it sidesteps conversion mistakes entirely.
When a pattern calls for "US 7," what you need in your hand is 4.5 mm. Some brands print both numbers on the needle. Some don't. Old markings wear off. A needle gauge tool is worth keeping nearby for exactly this reason.
Common conversion pitfalls
A few sizes trip people up consistently.
The UK reversal. US sizes go up as needles get bigger. Old UK sizes go down. A US 6 is 4.0 mm. A UK 6 is 5.0 mm. Swap those and your needle diameter is off by a full millimeter, which can change your gauge.
The missing one-to-one matches. Not every metric size has a clean equivalent in every other system. A 3.0 mm needle is sometimes labeled US 2.5 by some brands, while other charts place it between US 2 and US 3. A 3.5 mm needle usually has no old UK equivalent at all. When that happens, go back to the mm size and ignore the rest.
Japanese near-misses. Japanese sizes don't line up cleanly with US numbers. Japanese size 8 is 4.5 mm (matching US 7), but Japanese size 5 is 3.6 mm and doesn't sit neatly in the US system at all. If you're working from a Japanese pattern, match the mm value. Not the printed number. Always the mm value.
Half sizes and odd sizes are real. 2.5 mm, 3.0 mm, and 6.5 mm needles are standard production sizes even if your interchangeable set skipped them. This is why "go up half a size" sometimes turns into a rummage through the whole project bag.
Old pattern leaflets give no system label. A pattern from the 1970s that says "size 6 needles" could mean US 6 (4.0 mm) or UK 6 (5.0 mm) depending on which country published it. Check the publisher, then check the chart.
Needle size and yarn weight pairing
The chart can get you into the right neighborhood. Your swatch decides the exact address.
The current Craft Yarn Council weight system pairs lace with 1.5 to 2.25 mm, Super Fine with 2.25 to 3.25 mm, Fine with 3.25 to 3.75 mm, Light with 3.75 to 4.5 mm, Medium with 4.5 to 5.5 mm, Bulky with 5.5 to 8 mm, Super Bulky with 8 to 12.75 mm, and Jumbo at 12.75 mm and up.
Those ranges overlap on purpose. DK can make a firm hat fabric on a smaller needle or an airy shawl fabric on a larger one. The pattern gauge tells you which direction the designer intended. If you're not sure which yarn category you're holding, the yarn weight chart is the better place to start.
How to measure unmarked needles
Vintage needles, hand-turned wooden needles, and well-used interchangeables all end up with missing markings sooner or later. A needle gauge (sometimes called a needle sizer) fixes that. Slide the shaft into the holes until you find the one that fits cleanly without forcing.
Measure on the shaft, not the tip. The tapered point reads smaller than the working part of the needle. Wrong answer every time.
Most needle gauges show metric and US sizes, some include Japanese sizing too. If yours doesn't, use this needle size guide to find the mm equivalent and then knit a quick gauge swatch to confirm before you commit to the full project. If you're also choosing a needle material, that's a separate decision from size.
Frequently asked questions
Can I substitute a close needle size if I don't have the exact one?
You can, but a 0.5 mm jump often shifts gauge enough to matter. Swatch again for anything fitted.
Are needle sizes the same across all brands?
Not always. US labels can represent different metric diameters across brands or charts, especially US 17 and 19. Check the millimeter marking or measure the shaft with a needle gauge, then swatch.
What about circular needle sizes?
Same sizing as straights. The size describes the diameter of the straight shaft behind the tapered tip, not the needle or cable length. A 4.5 mm circular and a 4.5 mm straight needle have the same nominal diameter.
Do I need every needle size?
No. Most knitters live in a handful of sizes matching the yarns they use most. If you're working with Medium and Light yarns, you'll reach for 3.75 to 5.5 mm constantly.