Knitting Abbreviations
Search common English knitting abbreviations or technique names. This selection explains notation used in US and UK patterns.
Follow the pattern’s own key when it differs. Directions here assume stitches worked from the left needle to the right, viewed from the knit side for these knitted increases and decreases. Yarn in front/back means toward/away from you, regardless of RS/WS. Slipping direction and cable methods depend on the pattern; ssk also has documented variants.
- COCast on
- BOBind off (US) / Cast off (UK)
- kKnit
- pPurl
- st(s)Stitch(es)
- RSRight side
- WSWrong side
- repRepeat
- begBeginning
- remRemaining
- contContinue
- altAlternate; e.g. alt rows means every other row
- approxApproximately
- tblThrough back loop
- wyifWith yarn in front
- wyibWith yarn in back
- slSlip without working; follow the pattern for knitwise or purlwise
- sl stSlip stitch without working; follow the pattern for knitwise or purlwise
- pmPlace marker
- smSlip marker
- MCMain color
- CCContrast color
- dpn(s)Double-pointed needle(s)
- cnCable needle
- rnd(s)Round(s)
- M1Make one (generic)
- M1LMake one left
- M1RMake one right
- kfbKnit into the front then back of the same stitch (1 stitch increased)
- pfbPurl into the front then back of the same stitch (1 stitch increased)
- yoYarn over
- incIncrease
- k2togKnit two together
- p2togPurl two together
- sskSlip 2 stitches knitwise one at a time, then knit them together through back loops (left-leaning; 1 stitch decreased)
- skpSlip 1 knitwise, knit 1, pass the slipped stitch over (left-leaning; 1 stitch decreased)
- sk2pSlip 1 knitwise, knit 2 together, pass the slipped stitch over (left-leaning; 2 stitches decreased)
- s2kpSlip 2 together as if to knit 2 together, knit 1, pass both slipped stitches over (centered; 2 stitches decreased)
- CDDCentered double decrease (2 stitches decreased); use the method in the pattern key
- pssoPass slipped stitch over
- decDecrease
- C4FCable 4 front: hold 2 stitches on cable needle in front, knit 2, then knit the 2 held stitches
- C4BCable 4 back: hold 2 stitches on cable needle behind, knit 2, then knit the 2 held stitches
- C6FCable 6 front: hold 3 stitches on cable needle in front, knit 3, then knit the 3 held stitches
- C6BCable 6 back: hold 3 stitches on cable needle behind, knit 3, then knit the 3 held stitches
- T2FTwist 2 front: cross 2 stitches, holding 1 in front; knit/purl sequence is pattern-specific
- T2BTwist 2 back: cross 2 stitches, holding 1 behind; knit/purl sequence is pattern-specific
- St stStockinette stitch / Stocking stitch (UK)
- g stGarter stitch
- rev St stReverse stockinette stitch
- ribRibbing
- moss stMoss stitch
- seed stSeed stitch
- MBMake bobble (pattern-specific)
No matching abbreviations found.
How abbreviations read in context
Most abbreviations sort themselves into a few groups, and recognizing the group helps more than memorizing individual terms.
Basic stitches are single letters. k is knit,p is purl. A number after the letter tells you how many: k5 means knit five stitches. That's the whole system for the simplest ones.
Combined actions stack letters and numbers. k2tog means knit two stitches together. p2tog, same idea but purled. A lot of knitting shorthand works this way. Slow it down, read it literally.
Directional markers tell you which side of the fabric you're on. RS is right side, WS is wrong side. Matters because the same hand movement produces a different result depending on whether you're working the public face or the back.
Shaping abbreviations control how fabric grows or narrows.M1, M1L, M1R, and kfb add stitches. k2tog and ssk remove them. Knowing which ones lean left, which lean right, and which just add or subtract makes patterns easier to read at a glance.
Structure terms keep the instructions compact. rep, st(s), beg, rem, cont. Scaffolding, not stitches.
*k2, p2; rep from * repeats knit 2, purl 2: four stitches per repeat. An asterisk marks the start of a repeat. Repeat the marked sequence the number of times or to the stopping point specified. Brackets and parentheses can group repeats, but may also show size alternatives or actions worked into one stitch. Read the accompanying instruction.
US vs UK differences
A few terms shift across the Atlantic. The big ones:
US "bind off" is UK "cast off." US "gauge" is UK "tension." US "stockinette" is UK "stocking stitch." And the classic trap: "seed stitch" and "moss stitch" can swap meanings depending on the source, so a written stitch definition beats the name alone every time.
Most common abbreviations (k, p, yo, k2tog) are the same in both systems. If a pattern doesn't specify US or UK conventions, the stitch definitions section usually clears it up. When there's no stitch definition section at all, the designer's location is your best clue.
Pattern-specific abbreviations
This is where things get interesting, because plenty of abbreviations won't appear in any standard list. That's normal. They're custom shortcuts invented by the designer for that specific pattern, and they should be defined near the beginning of the instructions.
Cable patterns can use custom abbreviations. A chart key might define C4F, C6B, or something more specific to the design. The number typically tells you how many stitches cross. The letter at the end (F or B) tells you the direction: front or back, referring to where you hold the cable needle while crossing. But designers aren't always consistent with that convention. Some use L and R instead. Some number the total stitches involved, others number only the stitches that travel. The pattern's own definition is what counts.
Lace patterns build compound shortcuts too. One pattern writes CDD for a centered double decrease. Another spells the same thing out as sl2-k1-p2sso. A third uses s2kp. All three point at the same basic idea, but the exact execution can differ between designers, and some of these abbreviations get used for slightly different decreases depending on the source. If an abbreviation looks unfamiliar, check the pattern key before assuming it matches the most common version. Pattern keys exist for exactly this reason.
Colorwork patterns sometimes abbreviate color names or assignments. You might see MC (main color) and CC (contrast color), or CC1 and CC2 when multiple contrast colors are in play. Some designers use A, B, C instead. The abbreviations themselves are straightforward, but mixing up which color goes where will show in the finished fabric.
Some designers also create shorthand for repeated stitch sequences specific to their design. A pattern might define something like "MB" for a particular bobble method, or "cluster" for a specific combination of wraps and pulls that only applies to that project. These shortcuts save the designer from writing out a multi-step instruction every time it appears in the pattern. They only make sense inside that pattern.
It may be shorthand defined for that pattern. Check the abbreviation list, stitch definitions, notes and chart key. If it is still unclear, ask the designer before substituting a technique.
What the symbols on knitting charts mean
Chart symbols describe stitch operations. A square often represents one resulting stitch, but decreases use more than one stitch, cable symbols can span several squares, and a “no stitch” square is skipped without working or slipping a stitch. Use the chart key when counting.
There's no universal chart symbol standard, but many designers stay close to Craft Yarn Council conventions. An empty square usually means knit on RS and purl on WS. A dash means purl on RS. A circle is yo. A right-leaning slash marks k2tog, a left-leaning one marks ssk.
Charts are usually read from bottom to top. With stitches worked from the left needle to the right, RS rows normally read right to left and WS rows left to right. Charts worked in the round with RS facing normally read right to left. Check row numbers and notes: WS rows may be omitted, and other working directions need their own instructions.
If a pattern has both written and charted instructions, they should agree. When they don't (and it happens more than anyone would like), the pattern notes should say which takes priority. If they don't say, swatch a repeat before trusting either version.
A few abbreviations worth knowing early
There's no need to memorize everything before casting on. A first scarf might only use k and p. A simple hat adds a decrease or two. The rest accumulates naturally with the patterns you choose, and you'll find the same dozen abbreviations cover most of what you knit.
Both decrease one stitch and lean left on the knit side. For ssk, slip two stitches individually and knit them together through the back loops; the usual version slips both knitwise. For skp, slip one knitwise, knit one and pass the slipped stitch over. Their appearance can differ; follow the pattern’s method.
Another one worth flagging: psso (pass slipped stitch over) shows up both on its own and as part of compound abbreviations like sl1-k2tog-psso. When you see it standalone, it's usually following a slip instruction from the previous step.
The Craft Yarn Council publishes a reference for common knitting abbreviations. Regional and pattern-specific notation can differ, so check the pattern key.
Keep a reference open while you knit. This page is searchable, which is faster than flipping through tabs when your row is halfway worked. If you're also sorting out needle sizes or gauge measurements, those references pair well with this glossary. And if you're new to reading knitting patterns, the abbreviation key in your pattern is the first section to check before casting on.
Frequently asked questions
Are knitting abbreviations the same in US and UK patterns?
Most are identical. k, p, yo, and k2tog mean the same thing on both sides of the Atlantic. The differences cluster around a handful of terms: US "bind off" is UK "cast off," US "gauge" is UK "tension," and US "stockinette" is UK "stocking stitch." And "seed stitch" and "moss stitch" can swap meanings depending on the source, so trust the stitch definition over the name. When a pattern doesn't specify which system it uses, the designer's location is usually the best clue.
What does the asterisk mean in a knitting pattern?
An asterisk marks the start of a repeat. Repeat the marked sequence the number of times or to the stopping point specified. Brackets and parentheses can group repeats, but may also show size alternatives or actions worked into one stitch. Read the accompanying instruction.
What if I can't find an abbreviation in a standard list?
It may be shorthand defined for that pattern. Check the abbreviation list, stitch definitions, notes and chart key. If it is still unclear, ask the designer before substituting a technique.
What's the difference between ssk and skp?
Both decrease one stitch and lean left on the knit side. For ssk, slip two stitches individually and knit them together through the back loops; the usual version slips both knitwise. For skp, slip one knitwise, knit one and pass the slipped stitch over. Their appearance can differ; follow the pattern’s method.